Home > Builders Home

Additional Information and Resources

STOL CH 701 Additional Information
Check the NewPlane.com website for ongoing airworthiness notices and service letters
Link Update
Inspection of the Main Gear Spring Attachment Points 5/2018
Fuel System Inspection 1/2018
Horizontal Stabilizer – Inspection Mandatory 1/2017
Corrosion – Wing strut and general corrosion inspection, lubrication and general aircraft maintenance 1/2016
Sample Instrument Panel Layouts (template) 10/2010
Rotax 912 Bed Mount Steel Bracket E1-1X: Check for cracks 6/2010
Andair Fuel Selector Service Alert 6/2010
Seat Belt Attachment Doubler 9/2006
GSC Systems Propeller TBO and Operating Instructions
(3-blade ground-adjustable wood prop)
7/1/2005
Weight & Balance Worksheet 3/02
Cortec 373 Corrosion Protection
-Product Info (company brochure)
-
Material Safety Data Sheet
10/2003
Matco WHLA7 Flange Mount Axle Service Bulletin 10/19/04
Nosewheel Bungee Installation Tool. This tool allows you to install or replace nose gear bungee easily in minutes.
Using the Pneumatic Rivet Puller 12/2002
CONTROL DEFLECTIONS 2/2003
Top Channel "Zee" Reinforcement 10/2001
STOL CH 701SP Flight / Operating Manual – SAMPLE (26 pages 190 kb) 1/03
STOL CH 701 Flight / Operating Manual – SAMPLE (29 pages 210 kb) 3/99
Paint Scheme Worksheets (134 kb)
Predrilled Wing Skins Alignment
Sample raw materials list (scratch-building)
7-F-11-5: Flange Direction of Uprights 7F11-5: It's best to have the 20mm flange facing towards the back in order to bolt through the gear strut fitting 7F11-5. Note: This update does not affect existing aircraft. 10/2001
LP Aero Plastics' online documentation on handling drilling trimming and cleaning the acrylic windshield.
Installation drawing for BRS ballistic recovery chute (from BRS Inc.). 10/02

This web site is published strictly for informational purposes. It is maintained to provide a forum for exchanging information about Zenair designs. Any pictures, diagrams, drawings or graphs, are used for general identification only, and are not to be taken to represent technical drawings or replicas of exact parts. You should not consider the educational material in the web site to be the practice of general aviation.

This site is not intended to replace, substitute for or supersede any technical information contained in the drawings, any Federal Aviation Administration regulations, or the manufacturer’s manuals.< Neither Zenith Aircraft Company (ZAC) nor the authors guarantee the accuracy or completeness of any information published herein and neither ZAC or any other authors shall be responsible for any errors, omissions, or damages arising out of use of this information. This site is offered with the understanding that ZAC and any other authors are supplying information but are not attempting to render engineering or other professional services. If such services are required, the assistance of an appropriate professional should be sought. These statements are to be considered disclaimers of responsibility from anything published here.