Kit Prices for the CH701

CH 701 Drawings & Manual US$ 495.00
NEW updated CAD Drawings and Photo Assembly Manuals.
Detailed blueprints of the complete airframe and components (CAD drawings), supplied with aircraft serial number: All you need to ‘scratch-build’ the STOL CH 701. The Assembly Manuals are supplied on CD-ROM, with high-resolution Photo Assembly Guides. Plans and manual are included with the airframe kit. Add $15.00 for overseas Air Mail shipping. Add $15.00 for overseas Air Mail shipping.
plans

 

CH701 STOL Airframe Kit US$ 10,795.00
The STOL CH 701 airframe kit comes with all kit parts to build the airframe: The kit includes the factory riveted wing spars, pre-formed sheet-metal parts (ribs, skins, etc.), factory-welded parts, standard fuel system (welded aluminum wing tanks), controls, and hardware required for assembly of the airframe. Most skins are now supplied CNC pre-cut and pre-drilled! The kit includes the Drawings and Manuals.
701topper_1

 

CH701 STOL Finishing Kit US$ 3,195.00
The Finishing Kit includes the items to complete the aircraft, including the All-Terrain Gear and wheels with hydraulic disk brakes, the formed plexiglass windshield, “swing-up” doors, seat belts, wing struts, hardware, and more. Not included: firewall-forward powerplant and instruments packages, paint, and upholstery. Crating and shipping charges are extra.

 

CH 701 STOL COMPONENT KITS
WINGS KIT
$3,525.00
FLAPERONS & LEADING-EDGE SLATS KIT
$1,470.00
TAIL KIT
$1,295.00
FUSELAGE KIT
2,950.00
CONTROLS KIT
1,075.00
FUEL SYSTEM KIT (order with the wing kit)
$895.00

 

CH 701 STOL KIT OPTIONS
 

BUBBLE DOOR OPTION KIT
Formed acrylic bubble door to maximize cabin width and visibility, with composite door frame. Price shown for pair. Note: This is an upgrade kit and replaces the standard doors. Door hardware is included with fuselage kit.

 

701-bubble-door2 $585.00
 

ELECTRIC TRIM TAB KIT (Elevator)
Responsive electric trim tab on elevator, actuated by rocker switch on panel. Includes installation instructions, mounting hardware, and panel-mounted trim position indicator.

 

elev-trim $290.00
 

NEW LED NAV / STROBE/POSITION LIGHT KIT
AeroLED: Pair of wingtip mounted three-in-one combination navigation / strobe and position lights (includes mounting hardware). Introductory Price. Available as retrofit.

 

aeroled-exp1-600 $745.00
 

LANDING LIGHT KIT
AeroLED: Super-bright landing light mounts inside the wing leading edge slat. Introductory Price. Available as retrofit.

 

landing-light1 $385.00
 

MICRO VORTEX GENERATORS for ELEVATOR
Install these new vortex generators on the bottom of the elevator for even slower approach speeds. Kit includes everything you need to install the VGs to a new or existing STOL CH 701. Introductory Price. Details

 

P2180066 $84.00
 

LONG RANGE WING TANKS KIT
This kit option increases the size of the standard fuel tanks to approximately 12.5 U.S. Gallons (48 liters), replacing the standard 10 U.S. Gallons (38 liters) fuel tanks. The price is the additional cost for a pair of welded aluminum wing tanks. Order with the wings kit.

 

$395.00
 

TUNDRA TIRES (Pair, upgrade price)
Larger Aero-Classic “Tundra” tires replace the standard tires and fit the 6-inch wheels supplied in the Finishing Kit (see above). The price is the additional cost for two (2) larger tires for the main gear. Order with the Finishing Kit.

 

$54.00
 

AUXILIARY WING TANKS KIT (PAIR)
This kit option maximizes the fuel capacity of the aircraft by doubling up the number of standard fuel tanks to two tanks per wing. Welded aluminum wing tanks, approximately 10 U.S. Gallons (38 liters) each, installed inside the wing. Order with the wings kit.

 

$995.00
 

CABIN HEATER KIT
Exhaust shroud provides effective cabin heat. Includes heater on/off valve and panel mounted push-pull control. Order with the Rotax 912 engine package.

 

$160.00
 

FOLDING WINGS KIT
Fold back the wings for storage or trailering. (The standard wings are easy to detach). Available as a retrofit.

 

035a $560.00
 

TOW-BAR KIT
New tow-bar kit for easy ground maneuvering of the airplane. Snaps on the nosegear strut assembly. Retrofit.

 

(Video) $52.00
 

ZENAIRTM FLOATS, WITH RIGGING
Add a new dimension to flying with all-metal floats developed specifically for the STOL CH 701. Floats include rigging to the STOL CH 701. Retrofit. Available straight floats or amphibious floats.

 

http://www.zenairfloats.com
 

COMPLETE TOOL KIT
(including Sioux Air Drill model DR1412 3600 rpm, Pneumatic Riveter with Custom Machined Heads with air regulator valve, Spiralux Hand Riveter with Custom Machined Heads, “Cleco” temporary fasteners (supplied in recommended quantity), “Cleco” Pliers, 4 Toggle Clamps, 4 Finger “Handi-Clamps”, Drill Bits (#30, #40 and #20, supplied in recommended quantity), Left and Right WISS sheet-metal snips, Adjustable (“accordion”) hole spacer (10 holes), Metric tape measure, “Sharpie” felt tip markers, Vixen “Metal Mover” 8-inch hand file, 2 half-round 8-inch hand files, Edge distance marker block)

 

toolkit $ 875.00
 

TOOL KIT(above) without Air Drill

This kit contains all of the tools listed in the complete Tool Kit above except for the Air Drill.

 

$ 665.00

SHIPPING AND CRATING INFORMATION Click here