Kit Prices for the CH750 STOL

CH 750 STOL Drawings & Manual
STOL CH 750 Option Drawings Package:
US$ 495.00
US$ 125.00

Detailed blueprints of the complete airframe and components (CAD drawings), supplied with aircraft serial number: All you need to ‘scratch-build’ your own STOL CH 750 Light Sport Utility Aircraft. The Assembly Manuals are supplied on CD-ROM, with high-resolution Photo Assembly Guides. Plans and manual are included with the airframe kit. Add $15.00 for overseas Air Mail shipping.
plans

 

CH750 STOL Airframe Kit US$ 14,990
The STOL CH 750 airframe kit (edition 3, with taller cabin height) comes with all kit parts to build the airframe: The kit includes the factory riveted wing spars, pre-formed sheet-metal parts (ribs, skins, etc.), factory-welded parts, standard fuel system (dual wing tanks), controls, and hardware required for assembly of the airframe. Skins and most parts are supplied CNC pre-cut and pilot-hole match-drilled! The Airframe Kit includes the Drawings and Manuals for assembly.
750STOLtopper_4

 

STOL CH 750 “Quick Build Kit” Fuselage Assembly Additional
US$ 4,450

 

CH750 STOL Finishing Kit US$ 4,490.00
The Finishing Kit includes the items to complete the aircraft, including the spring gear, wheels with hydraulic disk brakes, the formed windshield, “swing-up” clear bubble doors, seats and seat belts, electric flaps and trim motors, hardware, and more. Not included: firewall-forward powerplant and instruments packages, paint, and upholstery. Crating and shipping charges are extra.

 

CH 750 STOL COMPONENT KITS
WINGS KIT
$4,975.00
FLAPERONS & LEADING-EDGE SLATS KIT
$1,895.00
TAIL KIT
$1,475.00
FUSELAGE KIT
$4,250.00
CONTROLS KIT
$1,525.00
FUEL SYSTEM KIT (order with the wing kit)
$995.00

 

CH 750 STOL KIT OPTIONS
 

NEW LED NAV / STROBE/POSITION LIGHT KIT
AeroLED: Pair of wingtip mounted three-in-one combination navigation / strobe and position lights (includes mounting hardware). Introductory Price. Available as retrofit.

 

aeroled-exp1-600 $745.00
 

LANDING LIGHT KIT
AeroLED: Super-bright landing light mounts inside the wing leading edge slat. Introductory Price. Available as retrofit.

 

landing-light1 $385.00
 

MICRO VORTEX GENERATORS for ELEVATOR
Install these new vortex generators on the bottom of the elevator for even slower approach speeds. Kit includes everything you need to install the VGs to a new or existing STOL CH 750. Details…

 

P2180066 $94.50
 

DUAL CONTROLS STICK OPTION
This option replaces the standard “Y” center stick with dual control sticks.
 
$495.00
 

ADJUSTABLE SEATS KIT
Seat rails make each seat adjustable (to maximize on leg room) and to facilitate access to the cabin.Details…
 
$220.00
 

MAP BOX KIT
This map box kit mounts in the instrument panel for easy access. Kit includes hardware and latch.
 
$68.00
 

CENTER CONSOLE KIT
Center console option mounts below the panel; approx. 4.75″ wide.
 
$65.00
 

LONG RANGE WING TANKS KIT
This kit option increases the fuel capacity (and range) of the aircraft to a total of 30 US Gallons (2 x 15).

 

$490.00
 

TUNDRA TIRES (Pair, upgrade price)
Larger Aero-Classic “Tundra” tires replace the standard tires and fit the 6-inch wheels supplied in the Finishing Kit (see above). The price is the additional cost for two (2) larger tires for the main gear. Order with the Finishing Kit.

 

$54.00
 

CABIN HEATER KIT
Exhaust shroud provides effective cabin heat. Includes heater on/off valve and panel mounted push-pull control. Order with the Rotax 912 engine package.

 

 

FOLDING WINGS KIT
Fold back the wings for storage or trailering. (The standard wings are easy to detach). Available as a retrofit.

 

035a $560.00
 

TOW-BAR KIT
New tow-bar kit for easy ground maneuvering of the airplane. Snaps on the nosegear strut assembly. Retrofit.

 

(Video) $52.00
 

ZENAIRTM FLOATS, WITH RIGGING
Add a new dimension to flying with all-metal floats developed specifically for the STOL CH 701. Floats include rigging to the STOL CH 701. Retrofit. Available straight floats or amphibious floats.

 

http://www.zenairfloats.com
 

COMPLETE TOOL KIT
(including Sioux Air Drill model DR1412 3600 rpm, Pneumatic Riveter with Custom Machined Heads with air regulator valve, Spiralux Hand Riveter with Custom Machined Heads, “Cleco” temporary fasteners (supplied in recommended quantity), “Cleco” Pliers, 4 Toggle Clamps, 4 Finger “Handi-Clamps”, Drill Bits (#30, #40 and #20, supplied in recommended quantity), Left and Right WISS sheet-metal snips, Adjustable (“accordion”) hole spacer (10 holes), Metric tape measure, “Sharpie” felt tip markers, Vixen “Metal Mover” 8-inch hand file, 2 half-round 8-inch hand files, Edge distance marker block)

 

toolkit $ 875.00
 

TOOL KIT(above) without Air Drill

This kit contains all of the tools listed in the complete Tool Kit above except for the Air Drill.

 

$ 665.00

SHIPPING AND CRATING INFORMATION Click here